On-Site Roll Forming Service Available Throughout The USA

Western States Metal Roofing can handle all of your on-site roll forming services. Available for commercial projects located anywhere within the continental United States. It's the perfect service for jobs that require extra long metal panels.

Get a Quote

On-Site Roll Forming Services Available

Do you provide your own on-site roll forming service?

Get a quote for coil here

Portable On-Site Roll Forming

What Is On-Site Roll Forming?

On-site roll forming is when a portable roll forming machine is used to manufacture metal roofing and siding panels on demand directly on the job site. This process involves steel coil being fed into a portable metal roll forming machine to be shaped into the desired metal roofing or metal wall panel profile. By roll forming the metal on-site, the metal panels can go directly up to the roof without ever touching the ground.

We bring our factory direct to your job site by providing you with experienced roll forming machine operators to help you get your job done fast and hassle-free. This service is perfect for metal roofing installers that have an upcoming commercial project that requires extra long metal panels but don't have their own metal roll forming machine.

Who’s On-Site Roll Forming For?

On-site roll forming is perfect for metal roofing and siding jobs that require extra long panel lengths. It allows you to avoid splicing the panels and eliminates a leak point.

Onsite roll forming is a service that’s provided to contractors only with a minimum of 5,000 square feet. It’s not a service that’s provided to homeowners.

Onsite roll forming and installation of the metal panels are independent functions. WSMR does NOT install metal roofing and siding panels. It's the contractors responsibility to install the panels.

Portable on site roll forming is available anywhere within the continental United States.

Locations & Requirements

Locations Offered For On-Site Roll Forming

WSMR offers our on-site roll forming service for projects anywhere within the continental United States.

Requirements at Job Site

This service can be used at any commercial location in the state that meets the below requirements:

Contractors Only
5,000 Sq. Ft. Minimum
Equipment - Customer to provide a 12,000 pound minimum all terrain forklift.
Labor To Catch & Stack Panels - While we provide a roll forming operator, you will be responsible for having a crew on-site at the time of your roll forming service to handle the panels once they are ready. If renting the machine only, we must qualify you to operate the machine first.
Certificate Of Insurance Is Required
Customer Must Supply A Cut List
All Jobsite Safety Equipment Must Be Provided
Weather Permitting - Please note that our on-site roll forming service is weather permitting. If there are inclement weather conditions on the date scheduled, such as rain or heavy winds, the service will have to be rescheduled for a later date.
Location Has Proper Space - To ensure your job site is eligible, WSMR will perform an on-site inspection prior to the date of your on-site roll forming service. This is so we can verify that your project location is both accessible and has enough space for roll forming. If you are ramping up to a roof, keep in mind you will need at least 30 feet of clearance from the roll former to the roof.

Do the panels need to be shot up to the roof?

We can provide a carriage to get your panels on the roof. However, this will require additional equipment that is to be supplied by the customer.

An Additional Forklift
Scissor Lift

Lead Times

How Quickly Can You Start?

We ask that you contact us at least three weeks prior to your desired project start date. This provides us time to inspect your project location and schedule your machine and roll forming operator.

For larger and commercial projects, the project time varies. This will be discussed in detail during your initial consultation.

Let's Get Started!

On Site Roll Forming

What Types Of Metal Panels Can Be Roll Formed On-Site?

Western States Metal Roofing offers on site roll forming services for these metal panels.

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/galleries/gun-metal-gray/standing-seam-gun-metal-gray-1.jpg

Snap Lock Standing Seam

Western Lock® standing seam panels don't require a roofing seamer tool. It's quicker and less expensive to install vs mechanically seamed roofing panels.

Clip Fastened With Concealed Fasteners
1.75" Panel Seam

See Details

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/galleries/gun-metal-gray/gun-metal-MS2.jpg

2" Mechanically Seamed

MS2® mechanically seamed panels are the most weather-tight panel that we offer. It's perfect for roofs with a very low slope roof. This panel requires a roof seaming tool.

Double Lock or Single Lock
2" Panel Seam

See Details

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/galleries/gun-metal-gray/gun-metal-Nail%20Strip.jpg

Nail Strip Standing Seam

Nail strip roofing panels are a snap lock system that uses screws and does not have clips. The male flange has one inch slots that are spaced 6 inches apart and fastened directly to the roof deck.

Nail Strip or Nail Flange System
1" or 1.5" Seam Height

See Details

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/galleries/gun-metal-gray/t-groove-gun-metal-gray.jpg

T-Groove® 1" Flush Wall Panel

Flush Panels for use in wall, fascia and soffit applications. Rounded interlocking leg and concealed fasteners improve appearance and strength. Painted and Galvalume®.

See Details

Western Reveal®

Give the outside of your building a facelift with these modern and gorgeous flush wall panels. Mix and match different reveals, face sizes, and widths.

1", 2", or 3" Reveals
Horizontal or Vertical Installation

See Details

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/products/board-and-batten/board-and-batten-two-panels.jpg

Board And Batten Metal Siding

Board and batten metal siding is a type of exterior cladding used in the construction of buildings, primarily homes and commercial structures. This requires less maintenance and serves as a great alternative option to wood siding.

See Details

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/galleries/gun-metal-gray/Gun_Metal_Western%20Wave.jpg

Western Wave®

Western Wave® is a rigid wall panel that can be installed vertically or horizontally. It's perfect for walls, equipment screens, and mansards

Concealed Fasteners
No Clips Required
7/8" Panel Height

See Details