On average, the lifecycle of a metal roof is around 40-60 years. This is one of the top advantages of a metal roof for your home.
Metal roofs have a higher upfront cost than other roofing materials, although most would agree their longevity is worth the initial investment. However, there are some issues that can compromise that longevity and possibly result in a roof replacement that’s sooner than expected.
At Western States Metal Roofing, we have been manufacturing metal roofing panels for over twenty years and are knowledgeable of how and why problems can occur.
We want you to get full use of your metal roof so we’ve compiled a list of the main factors to be aware of that affect a metal roof’s longevity. By taking the proper precautions, you can increase the lifespan of your metal roof. A longer lifespan means you get more value out of your roof before you have to pay for a new one.
One of the most common reasons a metal roof has issues prematurely is due to errors made during the installation. Many times the mistakes are simple, such as not tightening screws properly or using the wrong sealant.
For more information on metal roof installation errors, we suggest reading:
Top 8 Mistakes Made When Installing A Metal Roof
It is crucial to hire a roofing professional that has specialized experience with installing metal roof panels and has a valid contractor’s license. Depending on the type of panel used, metal roof installations require a different set of skills and tools than other types of roofing installations.
An installation that is done properly gives your roof the best chance of lasting as long as possible.
You don’t have any control over it, but weather can play a factor in the quality of your roof. Unfortunately, very harsh weather conditions like heavy snow and high winds can take a toll on any roof, not just metal.
If you live in an area with heavy snowfall, damage can potentially occur to the framing if the snow load builds up heavily and stays on the roof for an extended period of time.
While a snowstorm is out of your control, what you do after it isn’t and can help prolong the life of your roof. As long as it’s safe to do so, remove some of the snow to lighten the stress on the roof from the extra weight. Make sure that whatever tools you use to remove the snow, such as a snow rake, is safe to use on metal and will not cause scratches.
Metal is a strong material and this type of roofing can sustain winds up to 140 mph. Even so, if your area has hurricane force winds, you’ll want to do an inspection after the storm passes.
Depending on the kind of extreme weather, there are particular areas you should check on after the storm.
You want to choose a metal roof panel that is right for your climate. In areas of heavy snow, you want a heavy gauge, mechanically seamed standing seam roof as they provide maximum weathertightness.
In areas with more mild weather conditions, you have more flexibility with the type of metal roof you choose.
If you live within a mile of the ocean, you need to choose a metal roofing material that is compatible with the salt air found in coastal areas. Otherwise, your roof will rust and fail prematurely.
If a type of metal panel is used on a roof pitch that it is not recommended for, then the result could be repairs that need to be done from leaking.
The pitch of a roof refers to its steepness and states how many inches the slope rises for every 12 inches it runs horizontally. It can be expressed in degrees or as a percentage but is often seen in ratio form, such as 6:12. A 6:12 roof pitch means that the roof rises 6” for every 12” moving inward.
Certain types of metal roofing are not designed for roofs that are flat or have a very low pitch. A roof with a flatter pitch (below a .5/12) can accumulate water that leads to compromising the performance of the panel system.
A flat metal panel, such as standing seam, on a flat roof leaves nowhere for the water to drain. Eventually, the water will work its way underneath the roofing material resulting in rotting the substrate, color change, or leaks.
The minimum required roof slope for metal roofing is:
Mechanically Fastened Standing Seam: 1:12 Pitch with installation of Butyl Sealant
Snap-Lock Standing Seam: 3:12 Pitch
Exposed Fastener Panels: ⅞” Corrugated, R Panel/PBR Panel, 7.2 Panel/Western Rib: Varies. 3:12 Pitch is safe. If less than 3:12 check with the manufacturer.
The metal gauge, or thickness, of a panel can affect its durability which then also affects its longevity.
Remember, as a metal gauge number gets lower, the metal gets thicker. A 24-gauge metal panel is thicker than a 29-gauge metal panel. In this case, a 24-gauge panel would be stronger than the thinner 29-gauge.
When it comes to harsh weather elements like snow, high winds or hail, a thinner material could be a problem.
If your house is located in a climate that has snowfall regularly, 29-gauge is not recommended. The weight of the snow could be too much for the roof to handle, resulting in leaks or even causing the roof to cave in.
Homeowners in areas that experience high winds also want to stay away from thinner metal. A 24-gauge roof is not only thicker but also heavier than 29-gauge. The added weight gives the roof a greater chance of staying intact in the event of a very heavy wind storm.
24 gauge will out-perform any 29 gauge material. In hail prone areas, a heavier gauge will make sense due to impact-resistance rating from Underwriters Laboratory.
If you live in an area that experiences hail often, a thicker gauge is a better option to protect the lifespan of your metal roof.
To find out which gauge would be best for your roof, watch our gauge video:
The thickness of the material plays an important role in decreasing or increasing the longevity of your metal roof. We recommend that you read these two articles:
What Gauge Metal Roofing Should I Use For My Corrugated Roof?
What Gauge Metal Roofing Should I Use? (26 Gauge v. 29 Gauge)
Simple metal roof maintenance is the easiest way to catch an issue while it’s small, before it turns into a more serious situation. Not doing routine maintenance can cause problems that are forming to go undetected until after it’s too late, resulting in expensive repairs or even a roof replacement.
As mentioned earlier, inspections should be performed after extreme weather conditions. However, regular preventive roof maintenance should also be performed annually to stay ahead of any potential problems that can be forming.
To learn more about metal roof maintenance, we suggest reading:
How To Properly Maintain A Metal Roof
There are no guarantees with the lifespan of a metal roof because some factors such as weather are unpredictable and out of anyone’s control.
The best precautions to take so that a metal roof’s lifespan is not compromised are:
At Western States Metal Roofing, we want to make sure your metal roof will last for decades to come. We continuously create articles and videos to help homeowners properly choose, install, and maintain a metal roof.
For more answers to the most popular metal roofing questions, we suggest reading:
How Much Does A Metal Roof Cost?
Metal Roof vs. Asphalt Shingles: The Pros And Cons